ECM (Electronic Copy Monitor) Function Setting [4] (continued)
9-16 Key Operator Mode
Key Operator Mode
E.C.M. All Count Reset [2]
Reset the count for all ECM accounts.
ECM Setting Menu Screen ECM All Count Reset Screen
1 Press [HELP] to display the Help Screen, then touch Key Operator Mode.
Enter the 4-digit Key Operator password, then touch OK to display the Key Operator
Mode Screen. (See note 1.)
2Touch [4] E.C.M. function setting. The ECM Master Key Code Screen displays, if a code
is required.
3 Enter your 8-digit ECM master key code, then touch OK to display the ECM Setting
Menu Screen. (See note 2.)
4Touch [2] E.C.M. all count reset. The ECM All Count Reset Screen will be displayed.
5Touch YES to reset all counters to zero and to return to the ECM Setting Menu Screen or
touch NO to cancel.
Touching RETURN will also cancel this function and return to the ECM Setting Menu
Screen.
6 If other ECM setting changes are required, touch the desired key, from [1]~[3].
7Touch RETURN to restore the Key Operator Mode Screen.
8Touch RETURN to return to the Basic Screen and perform printing operations.
NOTES: 1If an invalid password is entered, enter the valid 4-digit password.
2If an invalid ECM master key code is entered, continue by entering the valid 8-digit code.
