Konica Force 65 Overview (continued)
3-4 Machine Information
Machine Information
Service Settings
Setting changes for the following functions can be made by your service representative.
Finisher-Paper Capacity
In the default condition, the Force 65 will produce unlimited sets. If required, your service
representative can set the printer to stop printing when the number of prints exceeds
specified capacity.
Key Operator Password
Your service representative can set a 4-digit Key operator password to access the Key
Operator Mode Screen.
After this setting is made, a Password Entry Screen will be displayed when Key Operator
mode is selected from the Help Screen. The user or Key Operator will be required to enter
the valid Key Operator password before accessing the Key Operator Mode Screen. It is
recommended that the Key Operator password be noted and kept in a secure place in the
event it is forgotten. Otherwise, you will be required to contact your service representative
to obtain a password.
Weekly Timer
Your service representative can set a 4-digit Weekly timer
master key code
to enable the
key operator to gain access to the Weekly Timer Setting Menu Screen.
After this setting is made, the Weekly Timer Master Key Code Screen will be displayed and
will always require entry of the set Weekly timer master key code to access the Weekly
Timer Setting Menu Screen.
Your service representative can set the weekly timer system to display the Weekly timer
key on the Help Screen which enables you to view Weekly timer settings.
Staple Sheet Capacity
Staple capacity is changeable, and may be set to 45, 40, or 35 by your service
representative.
Notice Message for ADD TONER/ PM CALL
Your service representative can set the printer message area to display “ADD TONER”
when the toner supply is low, or “PM CALL” when preventive maintenance is required.
