![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/9/b1/9b1b1af8-961a-480d-b5f5-738f8a7b64eb/9b1b1af8-961a-480d-b5f5-738f8a7b64eb-bg7.png)
3
Planning Your Wireless Network
Wireless-G Business Ethernet Bridge
Chapter 2
Example of WET200 in Ad-Hoc Mode
Example of WET200 in Ad-Hoc Mode
The WET200 can also be used to quickly set up a temporary
network, as shown above. The diagram shows three wired
networks, Office One, Office Two, and Office Three, each
with a direct connection to the other wired networks via
an Ad-Hoc network connection. The Bridge in Office One is
connected to a Linksys switch that provides power to the
Bridge. In this example, a DHCP server is set up to assign IP
addresses automatically, since the WET200 does not have
a built-in DHCP server. Alternatively, static IP addresses
can be used.