A SERVICE OF

logo

Open as PDF
next previous
13
10 MEMORY FUNCTION
Memory Recall
1. Model 1103 can store 90 sets of readings and will automatically calculate the average of the last 3
readings. When memory is full (90 sets of readings are stored), the oldest reading will be replaced
by the newest. Memory will not clear even if the batteries are removed;
Fig. 10-1
2. After a measurement is finished, or when the device is in standby mode, the user can press
button“M”torecallmemory.Pressbutton“M”todisplaytheaveragevalueofthelast3readings
as shown in Fig. 10-1;
Fig. 10-2
3. Pressbutton“M”again,thedevicedisplays“01”;thenafter1-2secondsthelatestreadingwill
display as shown in Fig. 10-2;