E
11
1 INSTALLATION
1-1 Connecting up
PC Settings
Before connecting your PC to the LCD monitor, change the display screen
settings (resolution and frequency) in accordance with those below.
Resolution and Frequency
fH: 31 kHz-61 kHz fV: 50 Hz-75 Hz
• The following 4 common display modes are preset in the LCD
monitor's memory. If the display mode input to the LCD monitor is
not one of the modes listed below, a part of the image may be
distorted or missing.
Mode Displayed Size
1 640 x 480 (-75 Hz) 1024 x 768
2 720 x 400 (70 Hz) 1024 x 768
{320 x 200 (70 Hz)}
3 800 x 600 (-75 Hz) 1024 x 768
4 1024 x 768 (-75 Hz) 1024 x 768
• The maximum resolution of this LCD monitor is 1024 x 768 at a
maximum fV of 75 Hz.
• The LCD monitor automatically enlarges lower display modes to the
maximum display modes (1024 x 768).
• The display modes, 720 x 400 and 320 x 200, have the same signal
timings. Select the appropriate resolution at “VGA Selection” to avoid
picture's distortion. See page 28.
• At the lower display modes, since the pixel elements are fixed, some
lines of the characters may become fuzzy. Use “Smoothing” to make
the lines clear. See page 23.
Using the LCD monitor with Windows
®
95/98/2000
A Monitor information file is saved in the EIZO LCD Utility Disk
included in the package. It includes all the L350 required information
for best operation with Windows 95/98/2000. Please install the enclosed
utility and select “EIZO FlexScan L350” from the monitor list in Windows
95/98/2000.
For installation procedure, please read the readme.txt in the utilily disk.
1 INSTALLATION
