12
1 INSTALLATION
Connecting the Cables
(1)Be sure that the power switches of both the PC and the LCD monitor
are OFF.
(2)Plug the signal cable into the D-Sub connector at the rear of the
monitor. Please ensure that the arrow mark on the casing of the
connector is visible when connecting.
When connecting the signal cable, check that the shape of the cable
connector matches the shape on the LCD monitor.
(3)Plug the other end of the cable into the video connector on the rear of
the PC.
Standard PC graphics board
Macintosh
(4) Plug the power cord into the power connector in the rear of the LCD
monitor. Plug the other end into a power outlet.
(5)Turn on the monitor’s main power and then switch on the PC power.
Whenever you finish your operation, turn off the PC and the monitor.
• Do your part to conserve energy, turn off the monitor when you
are finished using it.
Macintosh
Macintosh AdapterDSCR-153 (optional)
D-Sub
mini 15 pin
D-Sub 15 pin
D-Sub
mini 15 pin
D-Sub
mini 15 pin
D-Sub
mini 15 pin
Macintosh
(Blue & White)
Signal Cable (enclosed)
Signal Cable (enclosed)
D-Sub
mini 15 pin
D-Sub
mini 15 pin
Standard PC
graphics board
Signal Cable (enclosed)
