9
Section 2 - Installation
2.5 Operating Controls
The MB35 Moisture Analyzer controls are grouped as operating buttons and function buttons with three modes of
operation.
On/Off Turns display on and off.
TARE
Tares the balance. (Enters Run Mode). Accepts selection in Edit Mode. Ends Result Mode.
START
STOP
On / Off
TARE
MB35
HALOGEN
START
STOP
Print
Menu
Starts the drying process (Run Mode). Ends drying process (Enters Stop Mode).
OPERATING BUTTONS
EDIT MODE - The user is changing a parameter, no test running.
RUN MODE - The unit is in process of running a test.
RESULT MODE - Final result.
MB35 Panel Controls
FUNCTION BUTTONS
*
CLEAR
PAN
PRESS
TARE
100 °
10:00
0.000 g
*
100 °
0.000 g
10:00
ANALYZER SETUP
WEIGHT CAL
TEMP CAL
TIME-DATE
RS232
PRINT
EXIT
EDIT MODE
ONLY
EDIT MODE
ONLY
EDIT MODE
Initial press of button highlights tempera-
ture numerals. Additional presses increases
temperature setting in 5 degree increments.
Initial press of
button highlights shut-off
selection. Additional presses steps through
options, AUTO or TIMED (Minutes/seconds).
In a non-run mode, initial press of
button
brings up the ANALYZER SETUP screen.
CLEAR
PAN
PRESS
TARE
