A SERVICE OF

logo

3/8 X 2-3/4"~
I0
STEP 10:
Loop the ball end of the LOW ROW CABLE (16) aro
"
und one 3-1/2 PULLEY (12) and SECURELY assemble the 3-1/2" PUL-
LEY (12) to the UPRIGHT (1) using two 3/8 X 2-3/4" BOLTS (25), two 3/8" FLANGE SPACERS (33), two 3/8"
(31), and two 3/8" LOCKNUTS (32). (NOTE: Make sure CABLE is routed between the PULLEY and the retaJining bolt
shown in FIGURE 10.)
10