
P/N: 4PFX020-080 v1.0
©2008 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
03JUN08 v1.0 (4PFX020-080 v1.0)
v
v
PAXTON CHARGE COOLER Installation Instructions
This Paxton Charge Cooler system was designed as a street/strip oriented charge cooler.
As with any power enhancing product, this system is intended for use on healthy, well-maintained engines. Paxton
Automotive is not responsible for engine damage. Installation on new engines will not harm or adversely affect
the break-in period so long as factory break-in procedures are followed.
TOOL & SUPPLY REQUIREMENTS:
• Open End Wrenches: SAE and Metric
• Allen Wrenches: SAE
• Flat #2 Screwdriver
• Phillips #2 Screwdriver
• Wire Cutters, Strippers and Crimpers
• Tape Measure
• Pipe Tape (Teon)
• Adjustable Wrench
• 1" Hole Saw
• 3/8" Drive and Socket Set: SAE and Metric
• Hacksaw
• Hose Cutters
Before beginning this installation,
please read through this entire instruction booklet