11
.
etting up the monito
PiP / PbP Input: There are four different
video input to choose as the sub display
source: [DVI], [HDMI], and [DisplayPort].
Please refer below table for compatibility
of main/sub input source.
SUB SOURCE
POSSIBILITY (xl)
Inputs
VGA DP DVI HDMI
MAIN
SOURCE
(xl)
VGA Ɣ Ɣ Ɣ
DP Ɣ Ɣ Ɣ
DVI Ɣ Ɣ Ɣ
HDMI Ɣ Ɣ Ɣ
PiP Size: When PiP is activated, there are
three sub-window sizes to choose: [Small],
[Middle], [Large].
B
A
(main)
Small
Middle
Large
PiP Position: When PiP is activated, there
are two sub-window positions to choose.
Top-Right Bottom-Right
B
A
(main)
A (main)
B
Swap: The main picture source and the
sub picture source swapped on the
display.
Swap A and B source in [PiP] mode:
B
A (main)
B (main)
A
Swap A and B source in [PbP] mode:
A (main)B
B (main)A
Off: Stop MultiView function.
A (main)
Note
When you do the SWAP function, the video
and its audio source will swap at the same
time. (Refer to page 7 “Independent
audio playback, regardless of video input”
DisplayPort supports resolution to only
3840 X 2160 @ 30 Hz when in PBP mode
or when it is the sub source in PIP mode; it
supports resolution to 3840 X 2160 @ 60
Hz when it is the main source in PIP mode.
