38
7.
ustomer care and warrant
Proximity of Pixel Defects
Because pixel and sub pixels defects of the
same type that are near to one another may be
for the proximity of pixel defects.
Pixel Defect Tolerances
In order to qualify for repair or replacement
due to pixel defects during the warranty period,
monitor must have pixel or sub pixel defects
exceeding the tolerances listed in the following
tables.
BRIGHT DOT DEFECTS ACCEPTABLE LEVEL
2 adjacent lit subpixels
Distance between two bright dot defects*
BLACK DOT DEFECTS ACCEPTABLE LEVEL
2 adjacent dark subpixels
3 adjacent dark subpixels
Distance between two black dot defects*
TOTAL DOT DEFECTS ACCEPTABLE LEVEL
Total bright or black dot defects of all types
Note
1. 1 or 2 adjacent sub pixel defects = 1 dot defect
2. This monitor is ISO9241-307 compliant. (ISO9241-307: Ergonomic requirement,analysis and
3. ISO9241-307 is the successor of formerly known ISO13406 standard, which is withdrawn by the
4. Please refer to page 40 for European pixel defect policy.
Note
A red or blue bright dot must be more
than 50
percent brighter than neighboring dots while
a green bright dot is 30 percent brighter than
neighboring dots.
Black Dot Defects
Black dot defects appear as pixels or sub pixels
that are always dark or 'off'. That is, a dark dot is
a sub-pixel that stands out on the screen when
the monitor displays a light pattern. These are
the types of black dot defects.
