Recording While You’re Away
Select Cable or Satellite Box Viewing Channel
(Required Onlv if All Channels Are Received From a Cable or Satellite Box)
After you select the cable or satellite receiver box viewing channel, the VCR will automatically enter the out&t channel of your cable
or satellite box in the
VCR PLUS+
and Timer Programming menus as the channel to be recorded. No VCR Plus+ setup is required
when you use a cable or satellite receiver box.
Operating Instructions
1.
Press
MENU*PROG
on the remote to display the
VCR MAIN MENU on the
TV screen.
2. Press 4 to display
CHANNEL SETUP
menu.
3. Press 4 to display
Sat./Cable Box Setup
menu.
4.
Press
1 when the Sat./Cable Box Setup
menu
appears.
5. Press two numbers on the remote to enter the output
channel of your cable or satellite box. Press 0 before
a single-digit number. For Example: Press 03 for
channel 3.
If you connected your cable or satellite box to the
VCR using the cable or satellite box’s
AUDIONIDEO
OUT jacks,
press
INPUT
on the remote to select the
VIDEO IN
option.
Press
CLEAR
to erase a number.
6.
Press
MENlJePROG
when you are finished. A
message appears which will time out, or press
MENU*PROG
to return to
CHANNEL SETUP
screen.
The VCR will now automatically enter the output
channel of your cable or satellite box and
CABLE as
the channel to be recorded in the
VCR PLUS+
and
Timer Programming
menus.
7. Exit the menu system by following directions at the
bottom of the screen.
VCR MAIN MENU
1 VCR PLUS+ Programming
2 Timer Programming
3 Review Programs
4 Channel Setup
CHANNEL SETUP
1 Auto-Search Channels
- 2 Add/Remove Channels
3 Tuning: CABLE
4 Sat./Cable Box Setup
I _
Is a cable or satellite
box being used with the
- VCR for
all
channels?
1 Yes, continue
Enter the channel
number for vieui?g the
sat./cab,lfLbox slgnal
Press 01-13 or INPUT
Press MENU to exit
I
Your VCR ui
11
n'ow
receive all
channels
from the Sat./cable
box on VCR CH 03
Press MENU to exit
21
