Location of Controls
Front Panel
Tape Compartment
Remote Sensor
CHANNEL*TRACKING
(Up
or
Down)
Selects next higher or lower channel in the VCR’s
channel memory.
Adjusts tracking when a tape is playing.
REC*OTR
Starts VCR recording.
Used for one touch recording (OTR).
Remote Sensor
EJECT
Press when the VCR is stopped to eject the
cassette.
Receives signals from the remote control. Aim the
remote at this.sensor with no objects between them.
REWIND
F.FWD
(Fast Forward)
Fast forwards the tape when the VCR is stopped.
Searches the picture forward during playback.
Rewinds the tape when the VCR is stopped.
Searches the picture in reverse during playback.
STOP
PAUSE
Pauses action for viewing during playback.
Pauses recording to prevent recording of
unwanted scenes.
Stops the normal functions such as record,
playback, rewind, fast forward, or pause.
SPEED
Selects a recording speed (SP,
LP, SLP).
PLAY
Plays a tape.
TV*VCR
POWER
Turns the VCR on or off.
Switches the picture signal so that it either comes
from the VCR or the TV channel. See page 9.
Back Panel
r ___-,--_, _.----^-.^._ --. --I^,-_“-_ .,” “. _ ^ ^,,^ ,,-- ^ “x ..I_ .-xI1
1
L
i
INFROM i
ANTENNA 1
CH3 4 Switch
Selects the channel to which you will tune the TV
to see the VCR picture if you connect the VCR
using one of the basic hookups.
IN FROM ANTENNA
Connector
Receives a signal from an antenna or cable system
when attached.
OUT TO TV
Connector
Passes signal to TV using the cable supplied.
VIDEO INPUT
and
AUDIO INPUT
Jacks
Receives signals from another component, like a
VCR or camcorder, when it is connected to these
jacks. Use
INPUT
on remote to select.
VIDEO OUTPUT
and
AUDIO OUTPUT
Jacks
Sends signals from VCR to another component,
like a VCR or camcorder, when it is connected to
these jacks.
continued on next page
28
