3RF-HD3035
Introduction
Congratulations on the purchase of your new
Rocketfish RF-HD3035 external hard drive
enclosure kit.
The USB 3.0 Rocketfish 3.5" SATA hard drive
enclosure lets you install a high-speed SATA hard
drive and connect it to a computer via a USB 3.0
port. The enclosure has a built-in USB 2.0 hub and
a memory card reader.
SuperSpeed USB 3.0 transfers data at 5 gigabits
per second. That's up to 10 times faster than USB
2.0.
The performance may vary, based on your system
configuration.
Safety information
Warning: To reduce the risk of fire or electric shock, do
not expose this device to rain or moisture.
Important safety instructions
• This device is to be used in temperatures of
41~95°F (5~35°C). Temperatures exceeding
these limits may damage your hard drive or the
enclosure. Avoid heat sources or direct
sunlight.
• This device can be stored in a humidity range
of between 10% and 90%, and can be operated
in a humidity range of between 5% and 80%.
• Do not connect the device to your computer
without taking precautions to avoid
electrostatic discharge or short circuits, which
could damage the device or your computer.
• Do not place this device close to a source of
strong magnetic fields (such as a computer
screen, TV, radio, or speaker). Strong magnetic
fields can affect the reliability of data transfer
to and from the device.
• Do not place anything heavy on top of the
device.
• Use only the accessories provided in the
accessory package.
• Before you install or use the device, read the
user manual and assemble the enclosure
carefully.
• To prevent short circuits, do not leave any
metal objects inside the enclosure when
installing the hard drive.
• To prevent short circuits, do not use the device
close to water, rain, or high humidity.
Features
• Multi-function storage solution for your
computer.
• Supports up to 2 TB 3.5" SATA interface hard
drive.
• Provides a two-slot USB 3.0 card reader that
supports SDXC, SDHC, SD, MMC, MS, MS PRO,
xD, Compact Flash (UDMA, Type I / II), and IBM
Microdrive.
• Provides two external USB 3.0 downstream
ports.
• Can stand up or lie down while operating.
• One-button backup to easily backup, restore,
and synchronize data between your Windows
PC and the enclosure.
• Has one power-on LED, with backup active
indicator.
• Metal design facilitates rapid heat dissipation.
• Supports Plug-and-Play and is hot-swappable.
Package contents
• USB 3.0 3.5" SATA hard drive enclosure
• USB 3.0 A-B cable
• AC power adapter
•Utility CD (User Guide and software)
•Quick setup guide
•Stand
• Accessories
•Plastic brackets (2)
• Screws and screwdriver
• Rubber pads (4)
System requirements
• One formatted 3.5" SATA hard drive.
• PC or Macintosh computer with an available
USB 3.0 port. (You can connect to a USB 2.0
port, but it will only run at USB 2.0 speeds).
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within your hard drive
enclosure.
This symbol indicates that there are
important operating and maintenance
instructions in the literature
accompanying your hard drive
enclosure.
10-1087_RF-HD3035_MAN_ENG_V1.fm Page 3 Friday, October 29, 2010 1:25 PM
