A SERVICE OF

logo

Digital Still Camera
DSC-RX10
The product does not work properly.
Turn off the product. Remove the battery pack and insert it again. If the product is hot, remove the
battery pack, and allow it to cool down before trying this corrective procedure.
If an AC-PW20 AC Adaptor (sold separately) is used, disconnect the power cord. Connect the power
cord and turn on the product again. If the product repeats the same error often or still does not
work after trying these solutions, consult your Sony dealer or local authorized Sony service facility.
Notes on use
4-477-079-12(1)
Copyright 2013 Sony Corporation
Help Guide
Troubleshooting