14
–
DXC-S500 Product Information Manual
USER FILE SET UP Menu
SYSTEM SET UP Menu
DATA LOAD:
Selects the user setting to be loaded.
• No.0 (RESET): the factory settings
• No.1 (yy.mm.dd): user file 1
• No.2 (yy.mm.dd): user file 2
• No.3 (yy.mm.dd): user file 3
The year, month, and day that the data was saved are indicated in
parentheses.
DATA SAVE:
Saves the user setting as a user file.
• No.1 (yy.mm.dd): user file 1
• No.2 (yy.mm.dd): user file 2
• No.3 (yy.mm.dd): user file 3
The year, month, and day that the data is to be saved are indicated in
parentheses.
DATE & TIME:
Sets the date and time.
PC CARD INIT:
Initializes the PC card to be used with the camera.
ID SET MODE:
Assigns a user ID number up to 20 digits long.
BEEP:
Selects whether a beep is sounded during operation (ON/OFF selectable).
• KEY CLICK: Selects whether to sound a beep when an operation but-
ton is pressed (ON/OFF selectable). This item is displayed only when
BEEP is set to ON.
OSD COLOR:
Selects the color of the characters used for menus, information, and
messages displayed on the LCD (WHITE/BLUE/RED selectable).
COLOR BARS:
Outputs a color bar signal to the LCD monitor or an external monitor
(ON/OFF selectable).
LCD SET:
Adjusts the LCD monitor of the CCU.
• CONTRAST/BRIGHT/COLOR/BACKLIGHT adjustments are available.
DXC_S500_1C.qxd 02.10.21 2:18 PM Page 14
