A SERVICE OF

logo

ITEM
NO
PART
NO
DESCRIPTION
140 765-023 ·Outer Housing
(Includes
#1
0) ·
141
765-059 Screw
142 765-016 Motor Field
143 700-639
Screws
QTY
1
1
1
4
Figure 5
19
Motor Housing Replacement
WARNING: Before proceeding,
follow
the
~~essure
Relief
PrOCedure
outlined
on
Page 5. Additaonally,
follow
all other warnings
to
reduce
the
risk
of
an
injection injury, injury
from
moving
parts
or
electric
shock.
Always
unplug
the
sprayer before servicing!
1. Follow steps 1 through 6
in
Armature Replacement.
2. Remove
Switch cover plate (#56) and Insulator Plate
(#55). Located on Page
20.
3.
Disconnect black wire from Post (#2) of Motor Starter
(#54).
4. Disconnect black wire from Motor to white wire from
Power
Cord.
5.
Remove outer Motor Housing (#140).
6.
Loosen set screw (#141) and push Motor Field
Assembly (#142) out from the back of the outer Motor
Housing (#140).
7.
Inspect Motor Field Assembly (#142). If damaged,
replace.
8.
To install Motor Housing, reverse steps 1 through 6
here and steps 1 through 7 of the Armature
Replacement.