Titan Tool 515-592 Manual

next previous

Item Part # Description Quantity

1 542-015 Air hose assembly, 1/2” x 14” ...................1

2 539-015 Hose assembly, 1/4” x 22” ........................1

3 239-400 Drum clamp assembly (drum mount) .......1

4 525-555 Motor assembly ........................................1

5 928-509 StediFlo™ air control assembly ................1

6 174-565 Pump assembly (cart mount) ....................1

174-557 Pump assembly, (drum mount) ................1

Not pictured:

590-301 Cart assembly, cart mount ........................1

Pole Gun Assembly

123

Item Part # Description Quantity

1 701-802 Heavy material pole gun w/ 3/8” nozzle....1

2 450-034 Fluid hose assembly, 3/4” x 50’ ................1

3 550-112 Air hose assembly, 1/2” x 50’ ...................1

Setup Instructions

1. Attach 1/2” x 50 ft air hose (supplied) from air regulator to

gun.

2. Attach 3/4” x 50 ft uid hose (supplied) from StediFlo™

Material Valve to gun.

3. Attach a 1/2” minimum air hose (not supplied) from

compressor to inlet of StediFlo™ Air Valve.

NOTE: Seespecicationsforcompressorair

requirements.

NOTE: Donotusemorethan200ft(61m)ofairoruid

hose.

PowrTex 15:1 Assemblies

Pump Assembly