A SERVICE OF

logo

- 144 -
(3) Feed mode
[C: Batch (Non-cut)]
[C: Batch (Cut)]
Automatic forward feed standby is set to “OFF (Not performed)” in the system
mode.
[C: Batch (Cut)]
Automatic forward feed standby is set to “ON (Performed)” in the system mode.
Head position
(1) Place paper.
(2) End of feed
(Completes feeding to the top of form and stops)
(2) End of feed (Completes feeding to the top of form)
Head positionCut position
(1) Place paper.
(3) Feeds to the cut position.
(4) Cuts unnecessary paper.
(5) Feeds back to the home position.
(2) End of feed (Completes feeding to the top of form)
Head positionCut position
(1) Place paper.
(3) Feeds to the cut position.
(4) Cuts unnecessary paper.
(5) Feeds back to the home position.
(6) 19-mm automatic forward feed after 1 second