REPEATING (LOADING PROCESS)
After loading the airgun as described, make sure that the target, the
pellet trap and the surrounding area are safe. IWith each cycling of
the bolt lever the magazine rotates one position. Lift the bolt lever, pull
rearward and then push forward to its original position (illustration 5.a).
Disengage the safety as previously described. Your airgun is ready to
fire now.
1.
2.
FIRING CAPACITY
The capacity of the compressed air cylinder and thus the number of
remaining shots can be read off the integrated pressure gauge. When
the pressure falls to about 40 bars (28-joule and 40-joule variants), refill
the cylinder (see chap. 2.2
“Handling the compressed air cylinder”).
ADJUSTING THE TRIGGER
TRAVEL
2.7
Activate the safety (put „ON SAFE“).
Unload the airgun as described in point 2.5
"Unloading the rifle".
Adjust your customized trigger travel by using a screwdriver to give a
slight turn to the screw on the trigger (illustration 6.a).
Illustration 5.a
Illustration 6.a
0
50
100
150
200
250
300
315
28-joule and 40-joule variants
