A SERVICE OF

logo

Open as PDF
next previous
The Lower Panel
The lower panel can be removed to help make it easier to clean under the
range and to check for installation of the anti-tip bracket.
To remove the lower panel:
1.
Pull out bottom of panel.
To replace the lower panel:
2. Slightly swing out and lift panel to
remove from top clips.
I
I
1.
Place notches in top of panel over
the top clips.
2. Swing down and push bottom of
panel to secure bottom clips.
To verity the anti-tip bracket
is engaged:
l
Remove the lower panel.
l
Look to see if the anti-tip bracket
is attached to floor with screws.
l
Make sure one rear leveling leg
is positioned under the anti-tip
bracket.
l
See Installation Instructions for
further details.
22