Adjusting Copying Options
Phaser® 8510/8560MFP Multifunction Product
4-5
Specifying 2-Sided Originals or Copies
When you use the document feeder with 2-sided originals, one or both sides can be scanned
for copying. You can also create 1-sided or 2-sided copies.
Press the 2-Sided button on the control panel to select one of the following options:
■ 1 to 1: Scans only one side of the originals and produces 1-sided copies.
■ 1 to 2: Scans only one side of the originals and produces 2-sided copies.
■ 2 to 2: Scans both sides of the originals and produces 2-sided copies.
■ 2 to 1: Scans both sides of the originals and produces 1-sided copies.
Note: The factory default is 1 to 1.
Copies do not begin printing until the system has scanned all the originals for the first page.
When making two sided copies (1 to 2 or 2 to 2), printing does not begin until enough pages
have been scanned for two sides.
Note: The
1 to 2 and 2 to 2 options are not available on systems without the document feeder.
8560-047
Color
Mode
Document
Type
Output
Quality
2 Sided
Lighten
Darken
Reduce
Enlarge
