Backing Up and Restoring the Software 223
5. When the RCVR LED (7) on the Spire CX250 color server illuminates
steady orange, go to
Start > CX250 > CX250 Tools > System Backup
and Restore > Set Last Image recovery
.
6. When the OS confirmation message appears, click OK.
7. Press the green On/Off button continuously for 4-5 seconds to restart
the Spire CX250 color server.
Ghost copies the files from partition E to partition C. This process
takes approximately 5-10 minutes.
8. When Ghost finishes copying the files and the RVCR LED (7)
illuminates steady green, using the tip of a pen or similar object, press
the
RCVR button to exit recovery mode.
9. Restart the Spire CX250 color server.
a. Press the green On/Off button continuously for 4-5 seconds. The
Spire CX250 color server shuts down.
b. Press the green On/Off button again. LED 1 illuminates steady
green and the Spire CX250 color server restarts.
The backed up file runs, and the Spire Application software starts.
10. A system message may appear requesting you to restart the computer.
a. Quit the Spire Application software.
b. Click Yes to restart your computer.
