A SERVICE OF

logo

Open as PDF
next previous
Set Up Your Machine 1-17
1
3 Load the print material in the Automatic Paper Feeder. Do not exceed
the rated capacity for each type of print material. For media capacity
specifications, refer to Print Media Specifications on page 1-13 and
Specifications in the Appendix. Do not mix different types of print
media. Refer to the following instructions for loading each type of print
material.
a) Load paper or transparencies with the print side facing you.
b) Load envelopes with the flap side facing away from you. The end
of the envelope with the stamp area must enter the Automatic Paper
Feeder first.
The WorkCentre
385 will print on
the side facing
you.