Operator Guide 2-5
Managing the printer
1. Paper edge guide lines
2. Loading instructions
Do the following:
• Remove any damaged sheets.
• Trays 1 and 2: Load paper with the wrapper seam side up.
• Trays 3, 4, 5 and 6: Load paper with the curl side up. If you
do not see any curl, load the paper with the wrapper seam
side down.
• Fan predrilled paper fan thoroughly and remove any paper
plugs.
• Load transparencies and 9-inch / 229 mm tabs into trays 1
and 2 only.
• Ensure that the paper is loaded into the right front corner of
the tray.
CAUTION: Do not load above the MAX line on the paper guide.
Figure 2-6 Maximum fill line
• After loading paper in tray 1 or 2, adjust the rear guide to
touch the paper stack.
• In tray 3, 4, 5, or 6, adjust the rear and side paper guides
to touch the stack.
