Filter
Top Products
18
Bluetooth® technology has the capabil-
ity to wirelessly synchronize and trans-
fer data among devices. The Bluetooth
audio capabilities can be used for
wireless phones hands-free applica-
tions. Bluetooth has many profi les
and the unit is compatible with most
Bluetooth enabled wireless phones.
Before attempting to use the Bluetooth
functions on the unit, please make sure
your wireless phone supports Bluetooth
functions.
NOTE: The line-of-sight distance be-
tween this unit and your cellular phone
must be 30 feet (10 meters) or less for
sending and receiving voice and data
via Bluetooth wireless technology.
Before using Bluetooth functions, you
must pair your wireless phone and the
unit. Pairing is a special process used
when two devices connect for the fi rst
time. The pairing process is used to
generate a link key that is used for
authentication purposes for future Blue-
tooth connections between devices.
Refer to the procedures for “Pairing
Your Wireless Phone” and “Pairing a
Wireless Phone and the Unit.”
Pairing Your Wireless Phone:
Your wireless phone can be paired
with the unit in two manners. The unit
can initiate the search for compatible
devices and pair to the wireless phone
or the wireless phone can initiate the
search and pair to the unit. The follow-
ing paragraphs describe both methods.
NOTE: The following procedures are
generic. Procedures for pairing wireless
phones may vary slightly from phone
manufacturer to phone manufacturer.
Compatibility with all Bluetooth devices
is not guaranteed.
Pairing a Wireless Phone and the
Unit:
1. Select the Bluetooth setup op-
tion on the wireless phone to be
paired (please refer to the wireless
phone’s instruction manual to enter
Bluetooth setup, turn Bluetooth on/
off, and perform pairing). Access
the wireless phone Bluetooth func-
tion and set the Bluetooth function
to ON.
2. Set your wireless phone Bluetooth
discover mode to ON.
NOTE: Some discover modes
have a time limit, usually a minute,
before they are automatically
turned off.
3. Use the wireless phone’s add a
new device feature. A device or de-
vices will appear on your wireless
phone display.
NOTE: Some phones require a
“pass key” or pairing code to con-
nect. If your phone requires a pass
key or pairing code, you will need
to enter this number in the Pairing
Code fi eld under the Bluetooth
SETUP menu. The default pairing
code for many wireless phones is
“1234”. The default code for the
unit is “0000”.
4. A prompt to pair or bond should
appear on your wireless phone.
Accept the request and initiate the
process.
5. A prompt to enter a PIN number or
passkey for the unit should appear.
The default pass key for the unit is
“0000”.
6. At this point a prompt stating
pairing successful should appear.
Another prompt should appear
Connecting to a Bluetooth device
Bluetooth