Filter
Top Products
32
The ADVUV630 is compatible with the
PAC (Pacifi c Accessory Corporation)
steering wheel control adapter SWI-PS.
A 3.5mm female connector (labeled
“SWC”) on the back of the head unit
allows connectivity to the PAC adapter.
Please refer to the instructions included
with the PAC adapter for detailed instal-
lation information. The steering wheel
control option allows you to program
your existing steering wheel controls to
work with the ADVUV630.
Accessing the “SWC” Menu:
To access SWC mode, select the
“SWC” icon on page 2 of the Main
Menu.
NOTE: Before you begin, you MUST
press the
button to clear any prior
programming options. If a mistake is
made during the programming se-
quence, press the button to clear all
settings and start over. Otherwise, the
steering wheel control function may not
function properly.
Programming Keys 1-7:
1. Press the
button to clear any
existing program settings.
2. Touch the option (N/A) next to
each Key number to open a
window with possible program-
ming options (use the up/down
arrow buttons on the right side of
the screen to view additional Key
choices).
3. Use the up/down arrows to navi-
gate the list. Touch to select the
desired function for the selected
Key number.
4. Continue with Key 1 - Key 7 (Keys
+1 through +7 are reserved for
future use).
5. After selecting a desired function
for each Key (1-7), press the
button to begin programming your
choices to the buttons on your
steering wheel control. Follow the
on-screen commands to complete
this process, pressing the left/right
arrow buttons to move between
Key selections.
SWC Menu
SWC (Steering Wheel Control)