Filter
Top Products
1 Press BAND repeatedly to select the desired band
(F1, F2, F3, A1 or A2).
2 Press TUNEi (to move to higher frequencies) or
TUNEk (to move to lower frequencies) to tune in to
a station.
“ST” appears on the display when an FM station is
broadcasting in stereo, and receiving conditions are
good.
Seek Tuning and Manual Tuning
• Press and hold TUNEi or TUNEk until Seek
Tuning starts.
The unit locates a station automatically (Seek
Tuning).
• Press
TUNE
i or TUNEk repeatedly to search for
a desired station while increasing or decreasing
the frequency step by step (Manual Tuning).
To stop Seek Tuning, press TUNEi or TUNEk
again.
Monaural mode
When FM signals become weak, or FM reception
becomes poor, the unit automatically switches to
Monaural mode to reduce noise.
Note
When stereo sound is received, you can also press ST
and select “MONO ON” to listen in manaural mode.
To resume stereo sound receiving, press ST to “MONO
OFF”.
Local mode
Local mode allows you to tune in only to strong stations
during Seek Tuning.
1 Press LO before you start seek tuning.
“LO” appears on the display.
To return to Distant mode, press LO again.
“LO” disappears and the unit tunes in to all receivable
stations.
Using preset stations
You must preset stations before you can tune in to a
station using preset station number buttons.
PS/A.MEBAND SRC
TUNE
3
ENGLISH
3
ENGLISH
Restoring the factory settings
1 Turn off the unit.
2 Press and hold DISP until “LEVEL --” appears on the
display.
Note
You can restore the factory settings only for VOL, BASS,
TRE, BAL, FAD, H-BASS, DSSA and BBE as well as
aligned source volume levels.
Setting the beep tone
1 Turn off the unit.
2 Press and hold SEL until “BEEP” appears on the
display.
3 Turn AUDIO CONTROL to select “ON” or “OFF”.
4 Press SEL.
The unit turns off.
Setting the clock
1 Press and hold DISP until the clock indicator
flashes on the display.
2 Press TUNEi (to set hour) or TUNEk (to set
minute) and turn AUDIO CONTROL.
3 Press DISP.
Displaying the clock
1 Press DISP.
To return to the former display, press DISP again.
RADIO OPERATION
Tuning in to a station
(Seek/Manual Tuning)
LOSTBAND SRC
TUNE
Local indicator Frequency indication
* “F” means FM, and “A” means AM.
Stereo indicator
Band indicator*
Preset station number
Preset station
buttons 1 – 6