Filter
Top Products
One Disc Repeat Play
You can play all tracks on a disc repeatedly.
1 Press REP during CD Changer play.
“REP” appears on the display.
To cancel Repeat Play, press REP again.
One Track Repeat Play
You can play a track repeatedly.
1 Press REP1 during CD Changer play.
“REP1” appears on the display.
To cancel Repeat Play, press REP1 again.
One Disc Random Play
You can play all the tracks on a disc in random order.
1 Press RNDM during CD Changer play.
“RANDOM” appears on the display.
To cancel Random Play, press RNDM again.
Note
During Random Play, pressing r allows you to skip
only to the beginning of the current track, not to the
previous track.
TROUBLESHOOTING
Error code
In the following cases the corresponding error code
indication appears. Follow the suggestions below to
solve such problems. If the error code indication does
not disappear, consult an AIWA service center.
ERROR01 The disc magazine is not properly inserted
in the CD Changer. Reinsert the magazine.
Refer to the instruction manual for the CD
Changer.
ERROR02 No CDs are loaded in the disc magazine.
Insert CDs properly. Refer to the instruction
manual for the CD Changer.
ERROR03 Focus error. Check that the CD is loaded
properly (right side up, etc.), and the CD
contains valid data.
ERROR04 Problem with the CD Changer. Reset the
unit by pressing the reset button. If this does
not solve the problem, consult an AIWA
service center.
7
ENGLISH
CD CHANGER OPERATION
Playing a CD
You can play CDs from a connected AIWA CD Changer.
For detailed information on installing a CD Changer,
refer to the Installation and Connection manual supplied
with the CD Changer.
REP1
REP
DISC
INT SRC
RNDM
1 Press SRC repeatedly to display “CD-CH.”
The CD Changer play starts.
CD number
CD Changer indicator Track number
Press
t
r
Press and hold t,
then release it at the
desired point
Press and hold r,
then release it at the
desired point
DISCN
DISCM
To
Skip to the next track
Skip back to the beginning of
the current track or to the
previous track
Advance rapidly to locate a
desired point
Reverse rapidly to locate a
desired point
Start CD Changer play from
the first track on the next disc
Start CD Changer play from
the first track on the previous
disc
Intro Play
You can locate a desired track by monitoring the first 10
seconds of all the tracks on the CDs in the disc magazine.
1 Press INT during CD Changer play.
“SCAN” appears on the display.
2 Press INT again when the desired track is played.
The unit returns to normal CD play.