Filter
Top Products
5
ENGLISH
Notes
• When you play a CD that is already inserted, CD play
starts at the point where it stopped the previous time.
A newly inserted CD starts from the first track.
•A CD-R or CD-RW may take some time to start playing
back, but this is not a malfunction.
• If a CD-R or CD-RW with no data or incompatible data
is inserted, “ERROR03” will appear on the display.
(See the section “TROUBLESHOOTING”.) The unit
cannot play such discs.
Intro Play
You can locate a desired track by monitoring the first 10
seconds of all the tracks on a CD.
1 Press INT during CD play.
“SCAN” appears on the display.
2 Press INT again when the desired track is played.
The unit returns to normal CD play.
One Track Repeat Play
You can play a track repeatedly.
1 Press REP1 during CD play.
“REP1” appears on the display.
To cancel One Track Repeat Play, press REP1 again.
Random Play
You can play all the tracks in random order.
1 Press RNDM during CD play.
“RANDOM” appears on the display.
To cancel Random Play, press RNDM again.
Note
During Random Play, pressing r allows you to skip
only to the beginning of the current track, not to the
previous track.
AUXILIARY EQUIPMENT
Listening to a cassette/MD/MP3
portable player or other equipment
You can listen to music through equipment connected to
the unit. Refer to the operating instructions for the
corresponding equipment for more detailed information.
Be sure to remove any loaded CD to prevent possible
damage to the unit before connecting the equipment.
SRC
AUX IN jack
1 Connect a cassette/MD/MP3 portable player or other
equipment via the unit’s AUX IN jack (3.5 mm dia.).
2 Press SRC repeatedly until “AUX IN” appears on the
display.
Note
When a connecting cord is plugged into the AUX IN jack,
you cannot insert or eject a CD even if you press z. Be
sure to disconnect the cord before inserting or ejecting
the CD. Likewise, be sure to disconnect it before you
turn off the ignition switch, otherwise the front panel
won’t be retracted.
OTHER FUNCTIONS
SEL SRC
AUDIO CONTROL
TUNE
Changing the display contrast
1 Press and hold SRC until “CONT.” appears on the
display.
2 Turn AUDIO CONTROL to adjust the contrast.
Changing the key illumination color
You can choose blue or red as the key illumination color.
1 Press and hold SRC until “CONT.” appears on the
display.
2 Press TUNEi or TUNEk until “ILL” appears on the
display.
3 Turn AUDIO CONTROL to select 1 (for blue) or 2
(for red).
Setting the dimmer of the display
1 Press and hold SEL until “DIMMER” appears on the
display.
2 Turn AUDIO CONTROL to select 0 (bright) or
1 (dimmed).