Filter
Top Products
IC, LA9241ML
Pin No. Pin Name I/O Description
1 FIN2 O
For the connection of the pickup photodiode. Addition to the FIN1 pin creates an RF
signal and subtraction from it create an EF signal.
2 FIN1 O For the connection of the pickup photodiode.
3EO
For the connection of the pickup photodiode. Subtraction from the F pin creates a TE
signal.
4 F O For the connection of the pickup photodiode.
5 TB I Inputs the DC components in the TE signal.
6 TE- O
For the connection of a resistor which sets the gain of the TE signal between this pin
and the TE pin.
7 TE O TE signal output.
8 TESI I TES (track error sense) comparator input. The signal is passed through a BPF.
9 SCI I Shock detection input.
10 TH I Sets the time constant for the tracking gain.
11 TA O TA amp output.
12 TD- I Composes the tracking phase compensation constant between the TD and VR pins.
13 TD I Sets the tracking phase compensation.
14 JP I Sets the amplitude of the tracking jump signal (kick pulses).
15 TO O Tracking control signal output.
16 FD O Focusing control signal output.
17 FD- I Composes the focusing phase compensation constant between the FD and FA pins.
18 FA O Composes the focusing phase compensation constant between the FD and FA pins.
19 FA- I Composes the focusing phase compensation constant between the FD and FA pins.
20 FE O FE signal output.
21 FE- I
For the connection of a resistor whichs sets the gain of the FE signal between this pin
and the TE pin.
22 A-GND O Ground of analog signals.
23 SP O Single-ended output of the signals input to the CV+ and CV- pins.
24 SPI I Spindle amp input.
25 SPG I For the connection of a resistor which sets the gain in the spindle 12cm mode.
26 SP- I For the connection of the spindle phase compensation constant with the SPD pin.
27 SPD O Spindle control signal output.
28 SLEQ I For the connection of sled phase compensation constant.
29 SLD O Sled control signal output.
30 SL-
I Sled feed signal input from the microprocessor
.
31 SL+
32 JP-
I Tracking signal input from the DSP.
33 JP+
34 TGL I Tracking gain control signal input from the DSP. Low gain when TGL is "H".
35 TOFF I Tracking off control signal input from the DSP. Off when TOFF is "H".
36 TES O Outputs the TES signal to the DSP.
- 25 -