Aiwa ICT-X40B Car Stereo System User Manual


 
MAINTENANCE
SPECIFICATIONS
Cleaningthefrontpanel
Whenthefrontpanelissoiled,wipethesurface
ofthe panelwitha dryandsoftcloth.
Cleaningthetapehead
Use a cleaningcassetteto cleanthe playback
headandcapstansapproximatelyonceamonth.
Iftheplaybackheadisdirty,thehightonesmay
notbereproducedproperly.
Cleaningtheconnector
The connector on the reverse side of the front
panel needs to be cleaned occasionally. Wipe
the surface of the connector with a cotton swab
slightly moistened with alcohol.
RADIOSECTfON
(FM)
FrequencyRange:
S7.5 MHz–108 MHz
(100-kHz steps)
87.5 MHz–108 MHz
$50& steps)
Usable Sensitivity
50 dB Quieting Sensitivity
17.2 dBf
IF Rejection:
80 dB
Frequency Response 30 Hz–15,000 Hz
SIN Ratio 83 dB
Stereo Separation: 35 dB at 1 kHz
Alternate Channal Selectivity:
70 dB
Capture Ratio 3 dB
(AM)
Frequency Range
530 kHz–1,710 kHz
(10-kHz steps)
522 kHz–1,820 kHz
(9-kHz steps)
Ueable Sensitivity 30 IN (30 dB)
TAPESEGTION
Wow/Flutte~ 0.1% (WRMS)
Tape Speed: 4.8 cm/eec. (1 7/8ips)
S/N Ratio 50 dB
Frequency Response 40 Hz-14,000 Hz
Stereo Separation:
40 dB
FF/REW Time:
190 sec. (C-60)
AUDIOSECTION
Max. PowerOutput 35 W x 4 channels
CDINinput
Inputsensitivity(loadimpedance)
CD
IN: 500 mV (10 kQ)
GENERAL
Power-Supply Voltage
14.4 V(11 to 16 V allowable),
DC, negative ground
Load Impedence 4 Q
Tone Control: Bass *lOdBat 100Hz
Treble * 10 dB at 10 kHz
Preamp Output Voltage (load impedance):
2.2 V (10 kQ)
Installation size:
182 (W)
X 53 (H) X
155 (D) mm
(7 1/4 (W)X21/8 (H) X
8 % (D) (riches)
Accessory supptisd: Carrying cass (1)
Specificationsandexternal appearance are subjectto
change withoutnotice due to product improvement.
ENGLISH 12