Filter
Top Products
SETTING THE BEEP TONE
The unit ispreset atthe factory to beep each time
you press any button on the front panel except
OPEN. You can stop beeping by following the
procedure below.
[@cl -i EKIl
1 With the unit off, press 1 and 4 at the
same time.
The “BEEP indication appears.
Each time you press them, this function turns
on or off.
The beep function is activated when the
“BEEP indication appears with the audio
control indicator lighting up and deactivated
without the indicator.
Audiocontrolindicator
SETTING THE CLOCK
1
3
2;4
1
2
3
4
Press PWR.
Press and hold down DISP for more
than 1.5 seconds until the clock
indication flashes.
● If you do not proceed with step 3 within 5
seconds, the clock indication disappears.
Ez!mEl
Press V to set the hour.
Press
A to set the minutes.
Press DISP to stert working the clock
from Osecond.
Havingtheclockdisulayedwhilein Radio, Tape
Playo;CD Changar Play mode
Press DISP. To return the unit to
display, repeat the same procedure.
its former
5 ENGLISH