Filter
Top Products
1/1
Service Technical Information
MODEL NO. SUFFIX
TV C1400 KY,EZY−
KHY
SUBJECT
Notice of replacing EEPROM(remote control code change) REF No :G A1 067 E0−− −
DATE :29. OCT. 2001
<CONTENTS>
Remote control may cause malfunction after replaced EEPROM.
Change the remote control code after replaced EEPROM.
<SYMPTOM>
Press volume key then the channel will be changed.(For example)
<COUNTERMEASURE>
Change the remote control code by the following step 1 9.∼
Use jig remote control for countermeasure.
Jig remote control : S4 8B3 740 A01 (RC UNIT,R 40A01)−−− −
1. Select channel 91.
2. Set SHARPNESS 0 by PICTURE MENU.
3. Delete MENU screen (status of channel 91)
4. Press key button in the order of RED(SKIP) GREEN(MOVE) MENU.
5. Will be appear ADJUSTMENT on the display, set cursor to the lowest REMOCON.
6. Press " " (right cursor) button, and set to A.(display change by the order of D J A).
7. Turn power off.
Use original remote control from next step.
8. Turn power on.
9. Resume the position of SHARPNESS of PICTURE MENU by original remote control.
<NOTE>
Do not set " J " in changing remote control code. (code may not be able to set)
Replace EEPROM again if you set " J " by mistake.
When press remote control key in the order of RED(SKIP) GREEN(MOVE) MENU
press each button within around 1 second.
Service mode does not operate if you press slowly.
Ref. Parts Code Description Remarks
−−−− − −S4 8B3 740 A01 RC UNIT,R 40A01
G R Code No. Access Code Modified Ser. No. Parts Schedule
−− − − − −