Alpine CDA-9886R Car Stereo System User Manual


 
12-EN
Playback
1
Press (OPEN).
The front panel will open.
2
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
Close the front panel manually.
When a disc is already inserted, press SOURCE/ to
switch to the DISC mode.
TUNER DISC USB iPod*
1
/AUX+*
2
Bluetooth Audio*
3
CHANGER*
4
TUNER
*
1
Displayed only when the iPod is connected and AUX+ Setup is set to
OFF, refer to “Setting the AUX+ Setup Mode” (
page 21).
*
2
Displayed only when the AUX+ Setup is set to ON, refer to “Setting
the AUX+ Setup Mode” (
page 21).
*
3
Displayed only when Bluetooth IN is set to ADAPTER, refer to
“Bluetooth Setting” (
page 21).
*
4
Only when the CD changer is connected.
3
While playing back MP3/WMA/AAC, press or to
select the desired folder.
Pressing and holding or will change folders
continuously.
4
Press or to select the desired track (file).
Returning to the beginning of the current track (file):
Press .
Fast backward:
Press and hold .
Advancing to the beginning of the next track (file):
Press .
Fast forward:
Press and hold .
5
To pause playback, press / .
Pressing / again will resume playback.
6
After pressing (OPEN) to open the front panel,
press to eject the disc.
Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
If the CD does not eject, press and hold for at least 2 seconds.
The CD-player can play discs containing audio data, MP3 data,
WMA data and AAC data.
WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from
iTunes Music Store and files that are copy-protected (copyright
protection) cannot be played back on this unit.
The track display for MP3/WMA/AAC data playback is the file
numbers recorded on the disc.
The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
MP3/WMA/AAC Play Display
The folder number and file number will be displayed as
described below.
Press VIEW to switch the display. See “Displaying the Text”
(
page 19) for information about display switching.
CD/MP3/WMA/AAC
4 5
(OPEN)
F/SETUP
SOURCE/
/
Rotary encoder
/ENT
/ESC
VIEW
Volume level
Folder number
display
Elapsed time
File number display