Filter
Top Products
25-EN
An iPod
®
can be connected to this unit by using the proprietary
ALPINE FULL SPEED™ Connection Cable (KCE-422i) (sold
separately). When this unit is connected by using the cable, the controls
on the iPod are not functional.
• Set AUX+ Setup to OFF when an iPod is connected (refer to “Setting
the AUX+ Setup Mode” on
page 21).
• If the Bluetooth Box and an iPod are connected at the same time, be
sure to disconnect the iPod from the Bluetooth Box while turning
ACC to OFF.
iPods usable with this unit
• The unit can be used with the fourth generation and above
iPod, iPod photo, iPod mini or iPod nano. iPod Shuffle cannot
be used, however.
• Touch wheel or scroll wheel type iPods without the dock
connector cannot be connected to the unit.
• The unit can be used with the following iPod.
Fourth generation iPod
Fifth generation iPod
iPod photo
iPod mini
First generation iPod nano
Second generation iPod nano
• If the unit is used with iPod software versions of iTunes earlier than
7.1.0.59, correct function and performance are not guaranteed.
Playback
1
Press SOURCE/ to switch to the iPod mode.
TUNER DISC USB iPod*
1
/AUX+*
2
Bluetooth Audio*
3
CHANGER*
4
TUNER
*
1
Displayed only when the iPod is connected and AUX+ Setup is set to
OFF, refer to “Setting the AUX+ Setup Mode” (
page 21).
*
2
Displayed only when the AUX+ Setup is set to ON, refer to “Setting
the AUX+ Setup Mode” (
page 21).
*
3
Displayed only when Bluetooth IN is set to ADAPTER, refer to
“Bluetooth Setting” (
page 21).
*
4
Only when the CD changer is connected.
2
Press or to select the desired song.
3
To pause playback, press / .
Pressing / again will resume playback.
• A song playing on the iPod while it is connected to this unit will
continue to play from where it was paused after disconnection.
• If you listen to an episode from a selected podcast or audiobook, the
episode can be changed by pressing
or .
• An episode may have several chapters. The chapter can be changed
by pressing
or .
Searching for a desired Song
An iPod can contain hundreds of songs. By using file tag information
and keeping these songs organized in playlists, this unit’s search
functions will ease song searches.
Each music category has its own individual hierarchy. Use the Playlist/
Artist/Album/Song/Podcast/Genre/Composer/Audiobook search mode
to narrow searches based on the table below.
For example: Searching by Artist name
The following example explains how an ARTIST search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
1
Press
/ENT to activate the search selection
mode.
2
Turn the Rotary encoder to select the Artist search
mode, and then press
/ENT.
Playlist Artist Album Song Podcast Genre
Composer Audiobook Playlist
3
Turn the Rotary encoder to select the desired
Artist, and then press
/ENT.
iPod
®
(Optional)
/
Rotary encoder
SOURCE/
Preset buttons
(1 through 6)
5
6
4
/ENT
VIEW
/ESC
Return to the beginning of the current song:
Press .
Fast backward through current song:
Press and hold .
Advance to the beginning of the next song:
Press .
Fast forward through current song:
Press and hold .
Hierarchy 1 Hierarchy 2 Hierarchy 3 Hierarchy 4
Playlist Song — —
Artist* Album* Song —
Album* Song — —
Song — — —
Podcast Episode — —
Genre* Artist* Album* Song
Composer* Album* Song —
Audiobook — — —