Filter
Top Products
19-EN
4
Press and hold FUNC./SETUP for at least 2
seconds to return to normal mode.
• Press /SOUND to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Setting the Bluetooth Connection (BT IN)
With Bluetooth technology, you can place a hands-free call by a
Bluetooth-equipped mobile phone.
CDE-101R/CDE-101RM/CDE-102Ri:
If an optional Bluetooth INTERFACE (KCE-400BT) is connected,
make this setting when the Bluetooth function is used. For
details, refer to the Owner’s Manual of the optional Bluetooth
INTERFACE (KCE-400BT). Set ADAPTER when the Bluetooth
INTERFACE (KCE-400BT) is connected.
• The button can be used only when the optional Bluetooth
INTERFACE (KCE-400BT) is connected.
• If the mobile phone compatible with the Voice Dial function is
connected, the Voice Dial function can be used.
CDE-103BT/CDE-104BTi:
Set ADAPTER when the Bluetooth function is used. For details
on the set up procedure, refer to
“Bluetooth SETUP” on page 21.
Adjusting Source Signal Levels
If the difference in volume level between the CD player and FM radio is
too great, adjust the FM signal level.
Subwoofer On and Off
When the subwoofer is on, perform the steps below to adjust the
subwoofer output level.
1 In the normal mode, press Rotary encoder (AUDIO)
repeatedly to select the SUBWOOFER mode.
2 Adjust the level by turning the Rotary encoder.
Setting the Subwoofer System
Select either SYS 1 or SYS 2 for the desired subwoofer effect.
Changing Lighting Colour (CDE-102Ri/CDE-103BT only)
ILUM TYPE1 (Initial setting) / TYPE2 / TYPE3 / TYPE4
You can change the lighting colour of the following four buttons.
SOURCE/ , BAND/TA, , .
Scroll Type Setting
Choose from two scrolling methods.
Select the type you prefer.
Scroll Setting (TEXT SCR)
This CD player can scroll the disc and track names recorded on
CD-TEXT discs, as well as the text information of MP3/WMA/AAC
files, folder names and tags.
• The unit scrolls CD text names, folder names, file names or tag
display.
Demonstration
This unit has a demonstration feature for the display.
• To quit Demo mode, set to DEMO OFF.
Bluetooth Setting
BT ADAPTER (Initial setting) / BT OFF
Sound Customizing
FM-LV HI (Initial setting) / FM-LV LOW
SUBW ON (Initial setting) / SUBW OFF
SUBWOOFER BASS LEVEL TRE LEVEL BALANCE
FADER DEFEAT VOLUME SUBWOOFER
SUBW SYS 1 (Initial setting) / SUBW SYS 2
SUBW SYS 1: Subwoofer level changes according to the main
volume setting.
SUBW SYS 2: Subwoofer level change is different from the main
volume setting. For example, even at low volume
settings, the subwoofer is still audible.
Visual Customizing
TYPE1 : When the colour of the four buttons is blue,
the colour of the other is red.
TYPE2 : When the colour of the four buttons is green,
the colour of the other is green.
TYPE3 : When the colour of the four buttons is amber,
the colour of the other is red.
TYPE4 : When the colour of the four buttons is red,
the colour of the other is red.
SCR TYPE1 / SCR TYPE2 (Initial setting)
SCR TYPE1: The characters scroll from right to left, a
single character at a time.
SCR TYPE2: Words are built up from left to right, a single
character at a time. When the display is filled,
it is cleared and the remaining words are
displayed the same way until all words of the
title have been shown.
SCR AUTO / SCR MANU (Initial setting)
SCR AUTO: The CD text information, the text information of
folder and file names, and the tags are
scrolled automatically.
SCR MANU: The display is scrolled when a disc is loaded
or when a track is changed, etc.
DEMO ON / DEMO OFF (Initial setting)