Filter
Top Products
20-EN
Playing MP3 Data (PLAY MODE)
This unit can play back CDs containing both CD and MP3/WMA/AAC
data (created in Enhanced CD (CD Extra) format). However, in some
situations, playback of an enhanced CD may be difficult. In this case,
you can select playback of a single session only, containing the CD data.
When a disc contains both CD and MP3/WMA/AAC data, playback
starts from the CD data portion of the disc.
• Perform this setting before inserting a disc. If a disc has already been
inserted, remove it first.
Turning Mute Mode On/Off (INT MUTE)
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.
Connecting to an External Amplifier (POWER IC)
When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
• No sound is produced by the system when the power output is set to
OFF.
Setting the AUX+ SETUP Mode
An external device (such as a portable music player) can be connected
to the Full Speed connector of this unit. A conversion cable
(KCE-237B) for build up the AUX IN (optional) is required.
A portable music device and an iPhone/iPod cannot be connected to the
Full Speed connector at the same time.
You can change the AUX+ name display when AUX+ is set to ON.
Press / /ENT when AUX+ is set to ON, and select AUX+ NAME
by turning the Rotary encoder, then press / /ENT. After that, turn
the Rotary encoder to select the desired AUX+ name.
Setting the AUX NAME mode (CDE-102Ri/CDE-103BT/
CDE-104BTi only)
You can change the AUX NAME display in the SETUP mode.
*
1
After the setting is completed, AUX is displayed on the unit.
*
2
After the setting is completed, PMD is displayed on the unit.
MP3/WMA/AAC
CD-DA (Initial setting) / CDDA/MP3
CD-DA: Only the CD data in Session 1 can be played back.
CDDA/MP3: CD data, MP3/WMA/AAC files in mixed mode, and
multi-session discs can be played back.
External Device
MUTE ON / MUTE OFF (Initial setting)
POW ON (Initial setting) / POW OFF
POW OFF: Use this mode when the line output of this unit
is used to drive an external amplifier. In this
setting, the head unit’s internal amplifier is
turned OFF and cannot drive speakers.
CDE-102Ri/CDE-103BT/CDE-104BTi:
CDE-101R/CDE-101RM:
Amplifier
Front
left
Front
right
Amplifier
Rear
left
Rear
right
Amplifier
Front
left
Front
right
POW ON : The speakers are driven by the built-in
amplifier.
AUX+ ON / AUX+ OFF (Initial setting)
AUX+ ON: Set to ON when a portable device is connected. If
SOURCE/
is pressed and AUX+ is selected, the
sound of the portable device is input to the unit.
AUX+ OFF: Set to OFF when an iPhone/iPod is connected.
AUXILIARY *
1
(Initial setting) / TV / DVD / PORTABLE*
2
/ GAME
Speakers
SPEAKER
RIGHT FRONT
Front
right
SPEAKER
RIGHT REAR
Rear
right
SPEAKER
LEFT REAR
Rear
left
SPEAKER
LEFT FRONT
Front
left