Filter
Top Products
9-EN
* The illustration is for CDE-123.
Accessory List
• Head Unit..................................................................................1
• Power Cable..............................................................................1
• USB Cable (CDE-123 only)........................................................1
• Interface cable for iPod (CDE-123 only) .................................1
• SiriusXM Tuner (CDE-124SXM only)........................................1
• Mounting Sleeve......................................................................1
• Carrying Case............................................................................1
• Bracket key ...............................................................................2
• Screw (M5 × 8) ..........................................................................4
• Owner’s Manual..................................................................1 set
Turning Power On and Off
Press SOURCE to turn on the unit.
Note
• The unit can be turned on by pressing any other button except and
e (Release).
Press and hold SOURCE for at least 2 seconds to turn
off the unit.
Note
• The first time power is turned on, the volume will start from level 12.
Source Selection
Press SOURCE to change the source.
TUNER SIRIUSXM
*1
DISC USB FRONT
*2
/iPod FRONT
*3
PANDORA F
*4
BT AUDIO
*5
AUXILIARY
*6
TUNER
*1 Displayed only when a SiriusXM Tuner is connected.
(CDE-124SXM/CDE-123 only)
*2 Displayed only when no iPod/iPhone is connected. For
CDE-123, during USB FRONT source, you can switch to USB
REAR source by pressing BAND/F/R; for CDE-124SXM/
CDE-122, the source name is USB AUDIO.
*3 Displayed only when the iPod/iPhone is connected. For
CDE-123, during iPod FRONT source, you can switch to iPod
REAR source by pressing BAND/F/R; for CDE-124SXM/
CDE-122, the source name is iPod.
*4 The Pandora source can be displayed only when PANDORA is
set to ON. For details, refer to “Setting the Pandora Source” on
page 22. For CDE-123, during PANDORA F source, you can
switch to PANDORA R source by pressing BAND/F/R; for
CDE-124SXM/CDE-122, the source name is PANDORA.
*5 Displayed only when BT IN is set to HFP+AUDIO, refer to
“Setting the BLUETOOTH Connection” on page 19. (CDE-123
only)
*6 Refer to “Using the Front AUX Input Terminal” on page 17.
For CDE-123, during AUX source, you can switch to AUX
REAR source by pressing BAND/F/R when ON is set in “Setting
the AUX REAR Setup Mode (AUX-R SET)” (refer to “Setting the
AUX REAR Setup Mode (AUX-R SET) (CDE-123 only)” on
page 19).
Note
• You can recall your favorite source by pressing FAV directly. For details,
refer to “Set your favorite source to the FAV button (FAV SETUP)” on
page18.
Detaching and Attaching the Front Panel
1
Turn off the unit power.
2
Press e (Release) at the lower left side until the front
panel pops out.
3
Grasp the left side of the front panel and pull it out.
Notes
• The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel). This is not a
malfunction.
• To protect the front panel, place it in the supplied carrying case.
• When detaching the front panel, do not apply excessive force as it may
result in malfunction.
1
Insert the right side of the front panel into the main unit.
Align the groove on the front panel with the projections
on the main unit.
2
Push the left side of the front panel until it locks firmly into
the main unit.
Getting Started
Rotary encoder/ /ENTER
SOURCE/
AUDIO/SETUP
FUNC./VIEW
BAND/ F/R
FAV
Detaching
Attaching