Filter
Top Products
16-EN
01GB05CDA-9854R.fm
ALPINE CDE-9850Ri 68-04123Z56-A (EN)
Setting the Treble Control
You can change the Treble Frequency emphasis to create your own tonal
preference.
1
Press MENU to select the BASS ENGINE mode, then
press MODE.
BASS ENGINE SETUP RETURN (OFF) BASS ENGINE
2
Press or to select the TREBLE (Treble
Centre Frequency) control mode.
BASS TREBLE
3
-1 Press SOURCE/POWER to select the desired treble
Centre frequency.
10.0kHz 12.5kHz 15.0kHz 7.5kHz 10.0kHz
Emphasize the displayed treble frequency ranges.
3
-2*
2
Turn the Rotary encoder to select the desired
treble level (–7~+7).
You can emphasize the treble level.
4
Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
• If no operation is performed within 60 seconds, the treble control
setting will be turned off automatically.
• The treble level settings will be individually memorized for each
source (FM, MW (LW), CD, etc.) until the setting is changed. The
Treble frequency settings adjusted for one source are effective for all
other sources (FM, MW (LW), CD, etc.).
• Depending on the connected devices, some functions and display
indications do not work. However, Treble Level is still adjustable if
an audio processor with the Treble function is connected.
• This function is inoperable when DEFEAT is set to ON.
• If you press or in the treble control mode, the unit
changes to the bass control mode.
*
2
The adjustment can also be made by pressing MODE. Refer to
“Adjusting Bass/Treble/Balance (Between Left and Right)/Fader
(Between Front and Rear)/Defeat” (page 15).
Turning Loudness On/Off
Loudness introduces a special low- and high-frequency emphasis at low
listening levels. This compensates for the ear's decreased sensitivity to
bass and treble sound.
Press and hold MODE for at least 2 seconds to activate
or deactivate the loudness mode.
“LD” indicator lights.
Displaying the Text
Text information, such as the disc name and the track name, will be
displayed if playing a CD text compatible disc. It is also possible to
display the folder name, the file name, and the tag, etc., while playing
MP3/WMA files.
Press TITLE.
The display will change every time the button is pressed.
The display in Radio mode:
If there is PS (Programme Service NAME)
PS (Programme Service Name)*
1
Radio Text
PS (Programme Service Name)
If there is no PS (Programme Service Name)
FREQUENCY Radio Text FREQUENCY
The display in CD mode:
TRACK NO./ELAPSED TIME TEXT (DISC NAME)*
2
TEXT (TRACK NAME)*
2
TRACK NO./ELAPSED TIME
The display in MP3/WMA mode:
FOLDER NO./FILE NO./ELAPSED TIME FOLDER NAME*
3
FILE NAME*
3
ARTIST NAME*
4
ALBUM NAME*
4
TRACK NAME*
4
FRAME*
5
FOLDER NO./FILE NO./ELAPSED TIME
*
1
Press and hold TITLE for at least 2 seconds in the PS display mode,
“FREQUENCY” will be displayed for 5 seconds.
*
2
Displayed during playback of a disc with CD Text.
If there is no Text (Disc Name or Track Name), “DISC TEXT”/
“TRACK TEXT” is displayed.
*
3
“ROOT” is displayed for the folder name of the root folder which
does not have folder name.
If there is no folder name or file name, “FOLDER”/“FILE” is
displayed.
*
4
ID3 tag/WMA tag
If an MP3/WMA file contains ID3 tag/WMA tag information, the ID3
tag/WMA tag information is displayed (track name, artist name, and
album name). All other tag data is ignored.
If there is no tag information, “ARTIST”/“ALBUM”/“SONG” will
be displayed.
If “SCROLL AUTO” is set in “Scroll Setting (TEXT SCROLL)”
(page 18), tag information will automatically be scrolled.
*
5
The recording sampling rate and bit rate of the MP3/WMA file are
displayed. A WMA file of variable bit rate displays the average bit
rate.
Setting the Treble Centre Frequency
Setting the Treble Level
Other Functions
TITLE
01GB00CDA-9854R.book Page 16 Wednesday, October 19, 2005 8:21 AM