Filter
Top Products
19-EN
01GB05CDA9885.fm
ALPINE CDA-9885 68-08564Z14-A (EN)
Sound (Beep) Guide Function
This function will give audible feedback with varying tones depending
upon the button pressed.
Turning Mute Mode On/Off (INT Mute)
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.
Setting the AUX Mode (V-Link)
You can input TV/video sound by connecting an optional Ai-NET/RCA
Interface cable (KCA-121B) or Versatile Link Terminal (KCA-410C) to
this component.
You can change the AUX name display when AUX IN is set to ON.
Press //ENT when AUX IN is set to ON, and select AUX Name
by turning the Rotary encoder, and then press //ENT.
After that, turn the Rotary encoder to select the desired AUX name.
If the KCA-410C is connected, it is possible to select two AUX names.
• Via KCA-410C, up to 2 external devices with RCA output can be
connected. In this case, press SOURCE/ to select AUX mode and
then press BAND to select your desired device.
Changer Name Setting
This setting is used when the head unit is connected to the USB Adapter
for MP3 (KCA-620M). You can set the name to be displayed on the unit
depending on the device to which the USB Adapter for MP3
(KCA-620M) is connected.
Setting the External Digital Input
When an ALPINE Ai-NET compatible digital audio processor
(PXA-H701) and a DVD player (DVE-5207) not compatible with
Ai-NET are connected, set Digital AUX to ON to enjoy 5.1-channel
surround sound.
• Press SOURCE/ , and select the D.AUX mode, and adjust the
volume, etc.
• Depending on the connected audio processor, DVD player sound
may continue to be output, even though the source is changed to
another one. If this occurs, set the DVD player’s power to OFF.
Connecting to an External Amplifier
When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
• No sound is produced by the system when the power output is set to
OFF.
Setting the Language Font
Two types of font can be selected.
Demonstration
This unit has a demonstration feature for the display.
• To quit Demo mode, set to Demo OFF.
AUDIO is selected on the setup main menu in step 2.
Subwoofer On and Off
When the subwoofer is on, perform the steps below to adjust the
subwoofer output level.
1 In the normal mode, press the Rotary encoder repeatedly
to select the SUBWOOFER mode.
2 Adjust the level by turning the Rotary encoder.
Setting the Subwoofer System
Select either SUBW. System 1 or SUBW. System 2 for the desired
subwoofer effect.
Beep ON (Initial setting) / Beep OFF
INT Mute ON / INT Mute OFF (Initial setting)
AUX IN ON / AUX IN OFF (Initial setting)
Changer (Initial Setting) / USB / Portable
Digital AUX ON / Digital AUX OFF (Initial setting)
Power IC ON (Initial setting) / Power IC OFF
Power IC OFF :
Use this mode when the line output of this unit
is used to drive an external amplifier. In this
setting, the head unit’s internal amplifier is
turned OFF and can not drive speakers.
Amplifier
Front
left
Front
right
Amplifier
Rear
left
Rear
right
Power IC ON : The speakers are driven by the built-in
amplifier.
Language 1 (Initial Setting) / Language 2
Language 1 : Normal Font
Language 2 : European Font
Demo ON / Demo OFF (Initial setting)
Audio Setting
Subwoofer ON (Initial setting) / Subwoofer OFF
SUBWOOFER BASS TREBLE BALANCE
FADER DEFEAT VOLUME SUBWOOFER
SUBW. System 1 (Initial setting) / SUBW. System 2
SUBW. System 1 : Subwoofer level changes according the
main volume setting.
SUBW. System 2 : Subwoofer level change is different from the
main volume setting. For example, even at
low volume settings, the subwoofer is still
audible.
Speakers
SPEAKER
RIGHT FRONT
Front
right
SPEAKER
RIGHT REAR
Rear
right
SPEAKER
LEFT REAR
Rear
left
SPEAKER
LEFT FRONT
Front
left
01GB00CDA9885.book Page 19 Friday, November 17, 2006 7:31 PM