Filter
Top Products
10-EN
1
Check the wire size.
NOTES:
• Wire Size (Battery Lead, Ground Lead):
Recommended wire size for this unit is AWG4 or larger.
• Wire Size (Remote Turn-on Lead):
Recommended wire size for this unit is AWG8 – AWG14.
• If the wire gauge used is unknown, ask your dealer.
2
Remove the insulation from the ends of the wire leads by about 7 – 10mm (9/32"
– 3/8"). (Fig. 7)
NOTES:
• If length of the exposed wire is too short, a poor connection may occur causing operation
failure or sound interruption.
• On the other hand, if the length is too long, an electrical short-circuit may occur.
Connections
Cautions on wire lead connections
• Use Power Supply wire sold at your dealer’s store.
• Refer to the description below for the proper procedure.
If you are in doubt about how to make this connection, consult your dealer.
Fig. 7
7 – 10 mm (9/32" – 3/8")
Lead end side of the product