Filter
Top Products
FR
ES
DE
SE
IT
17-EN
< When not using a face panel >
1) Attaching an inner case to the headrest
2) Attaching a monitor to the inner case
3) Detaching the monitor
Headrest
Cushion (170 x 10 x 3)
Cushion
(170 x 10 x 8)
Inner case
Headrest
Headrest
cloth
Monitor
Inner case
Inner case
Monitor
Headrest
Monitor
Cut the headrest cloth about 10 mm to the
inside of the inner case mounting position.
Inner case mounting position
* Cut according to the opening
of the inner case and attach to
the inner front of the inner
case.
Cushion (170 x 10 x 3)
Inner case
After inserting in the headrest, anchor
these hooks in the cushion/urethane
foam to keep the inner case in place.
Column
Bind wire
Lock
Lock
Lock case
Machine screw (M3 x 6)
<Inner structure of headrest after installation>
Monitor lock release tool
Release the lock by inserting the tool, then draw the
monitor out and remove it.
• Insert the tool with the face panel removed.
• If the headrest cloth is stuck between the inner case
and monitor, pull out the headrest cloth, then insert
the tool to release the lock.