Alpine VPE-S431 Car Stereo System User Manual


 
6-EN
9 Dimmer LOW level adjustment (DIMMER
LOW LEVEL)
Adjusts the LOW LEVEL (0 (MIN) to 15
(MAX)) of the dimmer.
p Touch panel adjustment (SCREEN
ALIGNMENT)
Adjust if the LCD display position and touch
panel position do not match.
: Reset to default settings.
: Changes to adjustment screen. The
adjustment method is as follows.
1) Touch
from SCREEN ALIGNMENT.
The screen changes to the adjustment
screen.
2) Touch the
mark on the lower left side
of the screen.
The adjustment screen switches.
3) Touch the
mark on the upper right side
of the screen.
When the adjustment is finished, the
screen returns to the SETUP screen.
If you touch RETURN on the adjustment screen,
nothing is adjusted and the screen returns to the
SETUP screen.
6 When the settings are completed, touch
RETURN.
The screen returns to the source selection
screen.
Other Useful Features
3 Rear monitor select function (AUX OUT)
LINK : Output the video/audio portion
shown on the main monitor, to the
rear monitor.
AUX1 : Output the AUX1 video/audio to the
rear monitor.
AUX2 : Output the AUX2 video/audio to the
rear monitor.
4 Change sound output (SOUND OUT)
MONITOR : Outputs sound through the
built-in speakers.
HEADPHONE : Outputs sound to
headphones if connected.
*Note that sound will not be output unless
the audio output settings are appropriate.
5 External input sound level adjustment
(AUX IN 1 LEVEL/AUX IN 2 LEVEL)
HIGH: Sets the sound level at a high level.
LOW : Reduces the sound level.
6 External input name setting (AUX IN 1
MODE/AUX IN 2 MODE)
Select the name from the following list, to be
used for the product using the external input
mode. This will apply to the touch switch
name at source selection time and the
source name during playback change.
OFF/TV/EXT.DVD/GAME/AUX 1 (2)/LINK
(AUX 1 MODE only)
Set to LINK when an IVA-D300 or VPE-S431 is
connected. (Be sure to connect to the AUX IN 1
connector.)
Set to EXT.DVD when a DVA-5210, DVA-5205,
DHA-S680 or the like is connected.
Set to TV if a TV tuner is connected to this
product.
The way the source operation screens and the source
selection screen switches when CONTROL is
touched differs according to the selected mode. (See
page 4 Switching the Source, step 2.)
7 Navigation settings (NAV. IN)
When the navigation is connected, set to
ON.
8 Dimmer HIGH level adjustment (DIMMER
HIGH LEVEL)
Adjusts the HIGH LEVEL (16 (MIN) to 31
(MAX)) of the dimmer.