Alpine SWD-1600 Car Speaker User Manual


 
EN
Always use the extension power lead included (with 12A fuse), and connect directly
to the +ve battery terminal.
Only use the extension power cable included.
Also, please ensure to connect this directly to the +ve battery terminal. Should you feed off power from
the standard vehicle loom, the product may not function properly due to insufficient voltage.
The high current draw may also overheat the vehicle loom and create a fire hazard.
It is vital to securely connect the earth lead to a metal part of the vehicle chassis.
Please ensure to connect the earth lead to a metal part of the vehicle chassis with a screw.
If the grounding of the earth lead is insufficient, the product may malfunction.
Any paint or coating on the earth point of the vehicle chassis should be removed with a file to enable a
good connection.
DO NOT EXCEED THE INPUT LEVEL SPECIFIED FOR THIS PRODUCT.
If there is distortion or a popping noise from the subwoofer, the input level is too high. Prolonged
use in this condition will result in the deterioration of performance and may lead to damage..
DAMGE CAUSED BY EXCESSIVE INPUT LEVEL WILL NOT BE COVERED BY WARRANTY.
If reducing the gain to prevent distortion leads to insufficient output, please install the
subwoofer closer to the listener. As a general rule, halving the distance will result in 4
times the volume.
DO NOT USE A MOBILE PHONE NEAR THIS PRODUCT.
Use of a mobile phone may cause interference and noise.
EN