Alpine SWD-1600 Car Speaker User Manual


 
EN
TROUBLESHOOTING
If you have a problem with the product then please check the following
before taking for repair.
SYMPTOMS REASON SOLUTION
Unit does not operate. (For
example if the fuse is blown)
The head unit is not powered up.
Check the earth lead connection
Earth lead is not connected
properly.
The power lead to the battery is
not connected properly.
Replace with a fuse of the correct
rating.
Power up the head unit.
There is power but no sound.
The fuse is blown.
Remote turn on lead is not
connected properly.
Check the battery lead
connection
Check the remote turn on lead
connection
RCA leads are not connected.
Speaker level input cables are
not connected properly
The gain is not at the correct
level for the system.
Connect RCA leads correctly.
Check the speaker level input
cable connections.
Adjust the gain setting to an
appropriate level for the system.
SPECIFICATIONS
INPUT IMPEDANCE……………………..…………………………
22k (Line Input)
36k (Speaker Input)
MAX POWER OUTPUT……………………………………………
150W
CROSSOVER………………………………………………………
60~160Hz
DC 14.4V
(Operational between: 11~16V)
OPERATIONAL VOLTAGE……………………..…………………
282mm x 195mm x 92mm
DIMENSIONS……...……………………..…………………………
Negative Earth
EARTH TYPE……………………..………………...………………
4.0kgWEIGHT……...……………………..………………………………
EN