Filter
Top Products
11-EN
Inserting/Ejecting Cassette
1 Insert a cassette tape into the slot with the open
side facing right.
When the cassette is loaded, the player
automatically starts tape playback and indicates
"TAPE" in the display.
2 Press the Eject (c) button when you want to
eject the cassette tape.
NOTES
• When power is turned off or the front panel is removed,
the full-logic mechanism will automatically switch to
the PAUSE mode. This protects the tape from being
deformed by the pinch-rollers if left for long periods.
• Auto Metal
When a metal cassette tape is inserted, the player
automatically adjusts to the equalization for metal or
any other high bias tape for optimum sound.
Normal Play and Pause
1 Insert a cassette (or press the source button to
switch from the tuner or CD Changer mode if a
cassette is already inside the tape player).
The player begins playback. The display shows
"TAPE" and "
or " during tape playback to
show the tape side being played. When the end
of the tape is reached, the unit automatically
stops and reverses the tape to play the other
side of the tape.
Cassette Player Operation
2 Press the :/J button to pause the tape playback.
The display shows "PAUSE."
Press again to resume the tape playback.
3 Press the Eject (c) button to stop the tape play
and eject the cassette.
The tape-direction indicator disappears.
Dolby B NR (Noise Reduction)
(TDM-7583R only)
1 After inserting a Dolby B NR encoded tape,
press the NR B button.
The display shows the "NR B." The tape noise is
reduced in the Dolby NR mode when a Dolby B
NR encoded tape is played.
Press the NR B button to cancel the Dolby NR
mode.
Repeat Play
1 Press the REPEAT button to play back
repeatedly the current programme being played.
The RPT indicator appears and the programme
will be played repeatedly.
Press the REPEAT button to stop the repeat
play. The RPT indicator disappears.
Blank Skip (B.SKIP)
1 Press the B.SKIP button during tape play to skip
over blank portions of the tape lasting 15
seconds or longer, "B.S." appears on the display.
Press the B.SKIP button to cancel the blank skip
mode. "B.S." disappears from the display.
c NR B
REPEAT
B.SKIP-/J