Filter
Top Products
11
High Frequency Driver replacement continued:
7
7
Four nuts and eight washers may be
removed from the driver using the
8mm open end wrench. Turn counter-
clockwise to loosen and remove,
clockwise to tighten. The other three are
located around the horn assembly. Lift
the horn up as the nuts are loosened. It
cannot be removed otherwise. Notice
that the fl at washer is on the bottom,
followed by the locking washer, and
fi nally the nut.
8
8
Keep the four nuts, four locking washers,
and four fl at washers in a safe place.
9
9
The horn assembly should easily lift right
off of the high frequency driver.
fl at washer
fl at washer
headless
headless
screw
screw
locking washer
locking washer
nut
nut