Filter
Top Products
7
High Frequency Driver replacement:
1
Follow steps 1-4 of the led PCB
replacement instructions, as the grill will
need to be removed in order to access
the high frequency driver.
2
Eight screws and washers need to be
removed from the horn using the phillips
head screwdriver.
3
Keep the eight screws and fl at washers
in a safe place. Note: There are two
different screws that connect the horn
assembly to the cabinet.
1
2
3
4
5
6
7
8
Four screws for the top and bottom
of the horn assembly (#’s 1-4)
Four screws for the sides of
the horn assembly (#’s 5-8)