Filter
Top Products
9
High Frequency Driver replacement continued:
9
The high frequency driver should easily
lift right off of the horn assembly. Holding
down the horn assembly with one hand
while lifting up on the driver with the
other hand may help.
8
Keep the four headless screws in a safe
place, as well.
10
This is a straight down shot of the horn
assembly. There are two somewhat
oval-shaped indents next to where the
terminal markings are, as shown above.
This is how the new frequency driver
needs to line up. Follow the same steps
as above, but backwards 9 to 1. Power
up the SA1521z and the new driver
should now be pumping out those highs
again. Fantastic, you just replaced a
high frequency driver!
+
-